Home > Exhibition News > Some knowledge about Bare Engine

Some knowledge about Bare Engine

2025-05-08

If the engine is broken, the shock absorption effect of the engine is not obvious, resulting in a large vibration when the engine is running, and even accompanied by abnormal noise in severe cases. The bracket is used to fix the engine and the reducer.

The function of Bare Engine is to support and position the engine, usually through the transmission housing and the flywheel housing to support the engine and the flywheel.

The commonly used support methods are three-point support and four-point support. The front support of the three-point support is supported on the frame through the crankcase, and the rear support is supported on the frame through the gearbox.

Its function is to support and position the engine, usually through the transmission housing and the flywheel housing to support the Chevrolet Opel Daewoo Engine.

Bare Engine do not have a fixed replacement cycle. If they are broken, they will be replaced. From the above, we can also know that Bare Engine have problems, and some cars run more than 100,000.

Previous: What are the consequences of an Bare Engine breaking down?

Next: What will be the impact of an Bare Engine breaking?